version 3.69

all most parsimonious trees

for nucleic acid sequence parsimony criteria

© Copyright 1986-2008 by The University of Washington. Written by Joseph Felsenstein. Permission is granted to copy this document provided that no fee is charged for it and that this copyright notice is not removed.

Dnapenny is a program that will find all of the most parsimonious trees implied by your data when the nucleic acid sequence parsimony criterion is employed. It does so not by examining all possible trees, but by using the more sophisticated "branch and bound" algorithm, a standard computer science search strategy first applied to phylogenetic inference by Hendy and Penny (1982). (J. S. Farris [personal communication, 1975] had also suggested that this strategy, which is well-known in computer science, might be applied to phylogenies, but he did not publish this suggestion).

There is, however, a price to be paid for the certainty that one has found all members of the set of most parsimonious trees. The problem of finding these has been shown (Graham and Foulds, 1982; Day, 1983) to be NP-complete, which is equivalent to saying that there is no fast algorithm that is guaranteed to solve the problem in all cases (for a discussion of NP-completeness, see the Scientific American article by Lewis and Papadimitriou, 1978). The result is that this program, despite its algorithmic sophistication, is VERY SLOW.

The program should be slower than the other tree-building programs in the package, but usable up to about ten species. Above this it will bog down rapidly, but exactly when depends on the data and on how much computer time you have. IT IS VERY IMPORTANT FOR YOU TO GET A FEEL FOR HOW LONG THE PROGRAM WILL TAKE ON YOUR DATA. This can be done by running it on subsets of the species, increasing the number of species in the run until you either are able to treat the full data set or know that the program will take unacceptably long on it. (Making a plot of the logarithm of run time against species number may help to project run times).

The search strategy used by Dnapenny starts by making a tree consisting of the first two species (the first three if the tree is to be unrooted). Then it tries to add the next species in all possible places (there are three of these). For each of the resulting trees it evaluates the number of base substitutions. It adds the next species to each of these, again in all possible spaces. If this process would continue it would simply generate all possible trees, of which there are a very large number even when the number of species is moderate (34,459,425 with 10 species). Actually it does not do this, because the trees are generated in a particular order and some of them are never generated.

This is because the order in which trees are generated is not quite as implied above, but is a "depth-first search". This means that first one adds the third species in the first possible place, then the fourth species in its first possible place, then the fifth and so on until the first possible tree has been produced. For each tree the number of steps is evaluated. Then one "backtracks" by trying the alternative placements of the last species. When these are exhausted one tries the next placement of the next-to-last species. The order of placement in a depth-first search is like this for a four-species case (parentheses enclose monophyletic groups):

Make tree of first two species: (A,B)

Add C in first place: ((A,B),C)

Add D in first place: (((A,D),B),C)

Add D in second place: ((A,(B,D)),C)

Add D in third place: (((A,B),D),C)

Add D in fourth place: ((A,B),(C,D))

Add D in fifth place: (((A,B),C),D)

Add C in second place: ((A,C),B)

Add D in first place: (((A,D),C),B)

Add D in second place: ((A,(C,D)),B)

Add D in third place: (((A,C),D),B)

Add D in fourth place: ((A,C),(B,D))

Add D in fifth place: (((A,C),B),D)

Add C in third place: (A,(B,C))

Add D in first place: ((A,D),(B,C))

Add D in second place: (A,((B,D),C))

Add D in third place: (A,(B,(C,D)))

Add D in fourth place: (A,((B,C),D))

Add D in fifth place: ((A,(B,C)),D)

Among these fifteen trees you will find all of the four-species rooted trees, each exactly once (the parentheses each enclose a monophyletic group). As displayed above, the backtracking depth-first search algorithm is just another way of producing all possible trees one at a time. The branch and bound algorithm consists of this with one change. As each tree is constructed, including the partial trees such as (A,(B,C)), its number of steps is evaluated. In addition a prediction is made as to how many steps will be added, at a minimum, as further species are added.

This is done by counting how many sites which are invariant in the data up to the most recent species added will ultimately show variation when further species are added. Thus if 20 sites vary among species A, B, and C and their root, and if tree ((A,C),B) requires 24 steps, then if there are 8 more sites which will be seen to vary when species D is added, we can immediately say that no matter how we add D, the resulting tree can have no less than 24 + 8 = 32 steps. The point of all this is that if a previously-found tree such as ((A,B),(C,D)) required only 30 steps, then we know that there is no point in even trying to add D to ((A,C),B). We have computed the bound that enables us to cut off a whole line of inquiry (in this case five trees) and avoid going down that particular branch any farther.

The branch-and-bound algorithm thus allows us to find all most parsimonious trees without generating all possible trees. How much of a saving this is depends strongly on the data. For very clean (nearly "Hennigian") data, it saves much time, but on very messy data it will still take a very long time.

The algorithm in the program differs from the one outlined here in some essential details: it investigates possibilities in the order of their apparent promise. This applies to the order of addition of species, and to the places where they are added to the tree. After the first two-species tree is constructed, the program tries adding each of the remaining species in turn, each in the best possible place it can find. Whichever of those species adds (at a minimum) the most additional steps is taken to be the one to be added next to the tree. When it is added, it is added in turn to places which cause the fewest additional steps to be added. This sounds a bit complex, but it is done with the intention of eliminating regions of the search of all possible trees as soon as possible, and lowering the bound on tree length as quickly as possible. This process of evaluating which species to add in which order goes on the first time the search makes a tree; thereafter it uses that order.

The program keeps a list of all the most parsimonious trees found so far. Whenever it finds one that has fewer losses than these, it clears out the list and restarts it with that tree. In the process the bound tightens and fewer possibilities need be investigated. At the end the list contains all the shortest trees. These are then printed out. It should be mentioned that the program Clique for finding all largest cliques also works by branch-and-bound. Both problems are NP-complete but for some reason Clique runs far faster. Although their worst-case behavior is bad for both programs, those worst cases occur far more frequently in parsimony problems than in compatibility problems.

Among the quantities available to be set from the menu of Dnapenny, two (howoften and howmany) are of particular importance. As Dnapenny goes along it will keep count of how many trees it has examined. Suppose that howoften is 100 and howmany is 1000, the default settings. Every time 100 trees have been examined, Dnapenny will print out a line saying how many multiples of 100 trees have now been examined, how many steps the most parsimonious tree found so far has, how many trees with that number of steps have been found, and a very rough estimate of what fraction of all trees have been looked at so far.

When the number of these multiples printed out reaches the number howmany (say 1000), the whole algorithm aborts and prints out that it has not found all most parsimonious trees, but prints out what is has gotten so far anyway. These trees need not be any of the most parsimonious trees: they are simply the most parsimonious ones found so far. By setting the product (howoften times howmany) large you can make the algorithm less likely to abort, but then you risk getting bogged down in a gigantic computation. You should adjust these constants so that the program cannot go beyond examining the number of trees you are reasonably willing to pay for (or wait for). In their initial setting the program will abort after looking at 100,000 trees. Obviously you may want to adjust howoften in order to get more or fewer lines of intermediate notice of how many trees have been looked at so far. Of course, in small cases you may never even reach the first multiple of howoften, and nothing will be printed out except some headings and then the final trees.

The indication of the approximate percentage of trees searched so far will be helpful in judging how much farther you would have to go to get the full search. Actually, since that fraction is the fraction of the set of all possible trees searched or ruled out so far, and since the search becomes progressively more efficient, the approximate fraction printed out will usually be an underestimate of how far along the program is, sometimes a serious underestimate.

A constant at the beginning of the program that affects the result is "maxtrees", which controls the maximum number of trees that can be stored. Thus if maxtrees is 25, and 32 most parsimonious trees are found, only the first 25 of these are stored and printed out. If maxtrees is increased, the program does not run any slower but requires a little more intermediate storage space. I recommend that maxtrees be kept as large as you can, provided you are willing to look at an output with that many trees on it! Initially, maxtrees is set to 100 in the distribution copy.

The counting of the length of trees is done by an algorithm nearly identical to the corresponding algorithms in Dnapars, and thus the remainder of this document will be nearly identical to the Dnapars document.

This program carries out unrooted parsimony (analogous to Wagner trees) (Eck and Dayhoff, 1966; Kluge and Farris, 1969) on DNA sequences. The method of Fitch (1971) is used to count the number of changes of base needed on a given tree. The assumptions of this method are exactly analogous to those of Dnapars:

- Each site evolves independently.
- Different lineages evolve independently.
- The probability of a base substitution at a given site is small over the lengths of time involved in a branch of the phylogeny.
- The expected amounts of change in different branches of the phylogeny do not vary by so much that two changes in a high-rate branch are more probable than one change in a low-rate branch.
- The expected amounts of change do not vary enough among sites that two changes in one site are more probable than one change in another.

Change from an occupied site to a deletion is counted as one change. Reversion from a deletion to an occupied site is allowed and is also counted as one change.

That these are the assumptions of parsimony methods has been documented in a series of papers of mine: (1973a, 1978b, 1979, 1981b, 1983b, 1988b). For an opposing view arguing that the parsimony methods make no substantive assumptions such as these, see the papers by Farris (1983) and Sober (1983a, 1983b), but also read the exchange between Felsenstein and Sober (1986).

Change from an occupied site to a deletion is counted as one change. Reversion from a deletion to an occupied site is allowed and is also counted as one change. Note that this in effect assumes that a deletion N bases long is N separate events.

The input data is standard. The first line of the input file contains the number of species and the number of sites. If the Weights option is being used, there must also be a W in this first line to signal its presence. There are only two options requiring information to be present in the input file, W (Weights) and U (User tree). All options other than W (including U) are invoked using the menu.

Next come the species data. Each sequence starts on a new line, has a ten-character species name that must be blank-filled to be of that length, followed immediately by the species data in the one-letter code. The sequences must either be in the "interleaved" or "sequential" formats described in the Molecular Sequence Programs document. The I option selects between them. The sequences can have internal blanks in the sequence but there must be no extra blanks at the end of the terminated line. Note that a blank is not a valid symbol for a deletion.

The options are selected using an interactive menu. The menu looks like this:

Penny algorithm for DNA, version 3.69 branch-and-bound to find all most parsimonious trees Settings for this run: H How many groups of 100 trees: 1000 F How often to report, in trees: 100 S Branch and bound is simple? Yes O Outgroup root? No, use as outgroup species 1 T Use Threshold parsimony? No, use ordinary parsimony W Sites weighted? No M Analyze multiple data sets? No I Input sequences interleaved? Yes 0 Terminal type (IBM PC, ANSI, none)? ANSI 1 Print out the data at start of run No 2 Print indications of progress of run Yes 3 Print out tree Yes 4 Print out steps in each site No 5 Print sequences at all nodes of tree No 6 Write out trees onto tree file? Yes Are these settings correct? (type Y or the letter for one to change) |

The user either types "Y" (followed, of course, by a carriage-return) if the settings shown are to be accepted, or the letter or digit corresponding to an option that is to be changed.

The options O, T, W, M, and 0 are the usual ones. They are described in the main documentation file of this package. Option I is the same as in other molecular sequence programs and is described in the documentation file for the sequence programs.

The T (threshold) option allows a continuum of methods between parsimony and compatibility. Thresholds less than or equal to 1.0 do not have any meaning and should not be used: they will result in a tree dependent only on the input order of species and not at all on the data!

The W (Weights) option allows only weights of 0 or 1.

The options H, F, and S are not found in the other molecular sequence programs. H (How many) allows the user to set the quantity howmany, which we have already seen controls number of times that the program will report on its progress. F allows the user to set the quantity howoften, which sets how often it will report -- after scanning how many trees.

The S (Simple) option alters a step in Dnapenny which reconsiders the order in which species are added to the tree. Normally the decision as to what species to add to the tree next is made as the first tree is being constructed; that ordering of species is not altered subsequently. The S option causes it to be continually reconsidered. This will probably result in a substantial increase in run time, but on some data sets of intermediate messiness it may help. It is included in case it might prove of use on some data sets. The Simple option, in which the ordering is kept the same after being established by trying alternatives during the construction of the first tree, is the default. Continual reconsideration can be selected as an alternative.

Output is standard: if option 1 is toggled on, the data is printed out, with the convention that "." means "the same as in the first species". Then comes a list of equally parsimonious trees, and (if option 2 is toggled on) a table of the number of changes of state required in each character. If option 5 is toggled on, a table is printed out after each tree, showing for each branch whether there are known to be changes in the branch, and what the states are inferred to have been at the top end of the branch. If the inferred state is a "?" or one of the IUB ambiguity symbols, there will be multiple equally-parsimonious assignments of states; the user must work these out for themselves by hand. A "?" in the reconstructed states means that in addition to one or more bases, a deletion may or may not be present. If option 6 is left in its default state the trees found will be written to a tree file, so that they are available to be used in other programs. If the program finds multiple trees tied for best, all of these are written out onto the output tree file. Each is followed by a numerical weight in square brackets (such as [0.25000]). This is needed when we use the trees to make a consensus tree of the results of bootstrapping or jackknifing, to avoid overrepresenting replicates that find many tied trees.

8 6 Alpha1 AAGAAG Alpha2 AAGAAG Beta1 AAGGGG Beta2 AAGGGG Gamma1 AGGAAG Gamma2 AGGAAG Delta GGAGGA Epsilon GGAAAG |

Penny algorithm for DNA, version 3.69 branch-and-bound to find all most parsimonious trees 8 species, 6 sites Name Sequences ---- --------- Alpha1 AAGAAG Alpha2 ...... Beta1 ...GG. Beta2 ...GG. Gamma1 .G.... Gamma2 .G.... Delta GGAGGA Epsilon GGA... requires a total of 8.000 9 trees in all found +--------------------Alpha1 ! ! +-----------Alpha2 ! ! 1 +-----4 +--Epsilon ! ! ! +-----6 ! ! ! ! +--Delta ! ! +--5 +--2 ! +--Gamma2 ! +-----7 ! +--Gamma1 ! ! +--Beta2 +--------------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 4 no ...... 4 Alpha2 no ...... 4 5 yes .G.... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 7 no ...... 7 Gamma2 no ...... 7 Gamma1 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! ! +-----------Alpha2 ! ! 1 +-----4 +--------Gamma2 ! ! ! ! ! ! +--7 +--Epsilon ! ! ! +--6 +--2 +--5 +--Delta ! ! ! +-----Gamma1 ! ! +--Beta2 +--------------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 4 no ...... 4 Alpha2 no ...... 4 7 yes .G.... 7 Gamma2 no ...... 7 5 no ...... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! ! +-----------Alpha2 ! ! 1 +-----4 +-----Gamma2 ! ! ! +--7 ! ! ! ! ! +--Epsilon ! ! +--5 +--6 +--2 ! +--Delta ! ! ! +--------Gamma1 ! ! +--Beta2 +--------------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 4 no ...... 4 Alpha2 no ...... 4 5 yes .G.... 5 7 no ...... 7 Gamma2 no ...... 7 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! 1 +-----------------Alpha2 ! ! ! ! +--------Gamma2 +--2 ! ! +-----7 +--Epsilon ! ! ! +--6 ! ! +--5 +--Delta +--4 ! ! +-----Gamma1 ! ! +--Beta2 +-----------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 Alpha2 no ...... 2 4 no ...... 4 7 yes .G.... 7 Gamma2 no ...... 7 5 no ...... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... 4 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! ! +-----------------Alpha2 1 ! ! ! +--Epsilon ! ! +-----6 +--2 ! +--Delta ! +-----5 ! ! ! +--Gamma2 ! ! +-----7 +--4 +--Gamma1 ! ! +--Beta2 +-----------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 Alpha2 no ...... 2 4 no ...... 4 5 yes .G.... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 7 no ...... 7 Gamma2 no ...... 7 Gamma1 no ...... 4 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! ! +-----------------Alpha2 1 ! ! ! +-----Gamma2 ! ! +--7 +--2 ! ! +--Epsilon ! +-----5 +--6 ! ! ! +--Delta ! ! ! +--4 +--------Gamma1 ! ! +--Beta2 +-----------3 +--Beta1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 2 no ...... 2 Alpha2 no ...... 2 4 no ...... 4 5 yes .G.... 5 7 no ...... 7 Gamma2 no ...... 7 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... 4 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... +--------------------Alpha1 ! ! +-----Alpha2 1 +-----------2 ! ! ! +--Beta2 ! ! +--3 +--4 +--Beta1 ! ! +--------Gamma2 ! ! +--------7 +--Epsilon ! +--6 +--5 +--Delta ! +-----Gamma1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 4 no ...... 4 2 no ...... 2 Alpha2 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... 4 7 yes .G.... 7 Gamma2 no ...... 7 5 no ...... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... +--------------------Alpha1 ! ! +-----Alpha2 1 +-----------2 ! ! ! +--Beta2 ! ! +--3 ! ! +--Beta1 +--4 ! +-----Gamma2 ! +--7 ! ! ! +--Epsilon +--------5 +--6 ! +--Delta ! +--------Gamma1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 4 no ...... 4 2 no ...... 2 Alpha2 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... 4 5 yes .G.... 5 7 no ...... 7 Gamma2 no ...... 7 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 Gamma1 no ...... +--------------------Alpha1 ! ! +-----Alpha2 1 +-----------2 ! ! ! +--Beta2 ! ! +--3 ! ! +--Beta1 +--4 ! +--Epsilon ! +-----6 ! ! +--Delta +--------5 ! +--Gamma2 +-----7 +--Gamma1 remember: this is an unrooted tree! steps in each site: 0 1 2 3 4 5 6 7 8 9 *----------------------------------------- 0| 1 1 1 2 2 1 From To Any Steps? State at upper node ( . means same as in the node below it on tree) 1 AAGAAG 1 Alpha1 no ...... 1 4 no ...... 4 2 no ...... 2 Alpha2 no ...... 2 3 yes ...GG. 3 Beta2 no ...... 3 Beta1 no ...... 4 5 yes .G.... 5 6 yes G.A... 6 Epsilon no ...... 6 Delta yes ...GGA 5 7 no ...... 7 Gamma2 no ...... 7 Gamma1 no ...... |